Specification:
| Brand | ORTUR Laser Master 2 |
| Laser Model | LU2-4 |
| Large Engraving Area | 400x430mm |
| Motherboard | 32 bits motherboard with 32Bits MCU |
| Firmware | Ortur Laser Master Firmware |
| OS of Upper Computer | Windows (Working with LaserGRBL), MACs OS and Linux (Working with LightBurn) |
| Adapter power | 36W, 12V 3A |
| Machine power | 20W |
| Laser module power | 5000mW-5500mW |
| Laser Wave Length | 445 ± 5nm |
| Laser focus | Fixed focus |
| Default Focal Length | 29MM for LU2-4Laser Module |
| Input Format | NC, BMP, JPG, PNG, DXF, etc. |
| Carving Area | X: 400MM x Y: 430MM |
| Carving Speed | 3000MM / Min and less |
| Image size | No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it’s about 0.81um pixel precision) |
What’s the difference between the 4 models?
1.The Laser Master Engraver LU1-2 is good at picture engraving.
2. The Laser Master Engraver LU1-3 is the most cost-effective,available for both engraving and cutting.
3.The Laser Master Engraver LU1-4 is higher power and supports a faster engraving and cutting.
4.The Laser Master Engraver LU2-4 is Support for cutting thicker materials , better engraving and cutting result.
| Model | LU1-2 | LU1-3 | LU1-4 | LU2-4 |
| Motherboard | 32-Bit Motherboard | 32-Bit Motherboard | 32-Bit Motherboard | 32-Bit Motherboard |
| Electric Power | 7W | 15W | 20W | 20W |
| Luminous Power | 1600mW | 4000mW-4500mW | 5500mw | 5500mw |
| Max Input of Laser Diode | 6V, 1.35A | 6V, 1.8A | 4.5V, 3.5A | 4.5V, 3.5A |
| Max Input of Laser Module | 12V, 3A | 12V, 3A | 12V, 3A | 12V, 3A |
| Laser Wave Length | 450 ± 5nm | 445 ± 5nm | 445 ± 5nm | 445 ± 5nm |
| Engraving area | 150mm x 130mm | 150mm x 130mm | 150mm x 130mm | 150mm x 130mm |
| Support | LaserGRBL, LightBurn | LaserGRBL, LightBurn | LaserGRBL, LightBurn | LaserGRBL, LightBurn |
Features:
1. [Advanced firmware] Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful! The engraving speed can be as high as 3000 mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000MM/S)
2. [Excellent safety protection] 1. There is a G sensor on the main board, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving, the laser beam will stop to prevent fire. 3. If the laser engraving machine is under control, but the user forgets to operate and keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
3. [Perfect compatible system] Use LaserGRBL or LightBurn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Macs OS and Linux.
4. [Achieving precise engraving] The laser power range can be S0-S1000. Compared with only S0-S255, Ortur Laser Master can control the laser beam more accurately, and can even “draw” a photo on paper with a high-power laser unit. The 8-bit high-power laser engraving machine cannot do it.
Support All Computer Systems
*LaserGRBL (free software) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
*LightBurn (paid software) supports Windows, Macs OS, and Linux. It’s the most popular paid carving software in the world, very easy to use.
NOTE:
1.When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.
2.Do NOT operate laser without eye protection (Laser goggles).
3.Please set up laser engraver in the fireproofing area, with good ventilation.
4.Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection
5.Please avoid strongly impact on the machine.
6.Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
7.Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
8.Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
9.While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.
Package Included:
1 x ORTUR Laser Master 2 Engraver
1 Set Accessories