Will have little stock next week.
May 11th, 2021
Features:
– Everything you need to bind and fly!
– Optimized weight distribution: Caddx Nebula Nano and Stack centered
– Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack
– Equipped with the Caddx Nebula Nano Digital System & DJI FPV Goggles V2
– Buttery-smooth 720p 120fps FPV feed
– Pre-tuned with smooth freestyle settings
– Full 3K Carbon Fiber airframe with chamfered arms
– Equipped with XING 2207 motors
– Weight: 445.4g without battery and Camera mount
– LED illuminated Logo
Specification:
| 217mm Frame Kit | Wheelbase: 217mm Material: Full 3K Carbon Fiber Arm Thickness: 5.5mm Bottom Plate Thickness: 2.5mm Top Plate Thickness: 2.5mm Middle Plate Thickness: 3mm Camera Mount Plate Thickness: 2.5mm (included TPU inserts) Bottom to top distance: 28mm Dimension: 166x139mm (body dimension) |
SucceX-D F7 TwinG V2.1 Flight Controller ( Product Link) | Input Voltage: 2-6S, Max. 8S Firmware Target: IFLIGHT_F722_TWING MCU: 216MHz STM32F722 Gyroscope: 2x ICM20689 Barometer: YES Blackbox：32MB Betaflight OSD: YES BEC: 5V 2.5A & 9V 2.5A Smartaudio & Tramp VTX protocol supported urrent sensor scale: 100 UARTs: 5 Dimensions: 36x36mm ; Mounting Hole: 30.5×30.5mm φ4mm with Grommets φ3mm Weight: 7.5g USB type-C |
| SucceX 50A 2-6S BLHeli_32 4in1 ESC | Input Voltage: 2-6S Lipo STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware Current sensor: Yes Telemetry：Supported BEC: No Dimension: 43x39mm ( Mounting Holes: 30.5×30.5mm/Φ3mm) Weight:14.4g Supports: DShot DShot150/300/600/1200/MultiShot etc. Target: iFlight-BL32-4IN1 BLHeliSuite download (BL32): Link |
XING 2207 1800KV 6S Motor ( Product Link) | Configu-ration: 12N14P Stator Diamter: 22mm Stator Length: 7mm Shaft Diameter: 5mm |
Nazgul 5140 3-Blade Propeller | Item Name: 5140 Durable 3-Blades Propeller Quantity: 2 CW & 2 CCW Color: may vary |
Caddx Nebula Nano HD System | Brand Name: Caddx Item Name: Vista Kit Operating Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot Supported Flight Control System: F3,F4,F7 Operating Temperature Range: 32° to 104° F (0℃ ~40℃) Input Power: 7.4-26.4V Model: Nebula Nnao Camera Image sensor: 1/3 inch CMOS sensor Resolution: 720p/60fps FPV/Recording FOV: 150° Lens: 2.1mm FPV Latency: 32ms TV system: NTSC&PAL(switchable) Work Temperature : -20℃~+60℃ Weight: 4.5g Demension: 14*14*21mm(can be extended into 19*19mm) |
| Receiver | Built-in DJI Receiver, compatible with DJI Remote Controller |
| DJI FPV Goggles V2 | Weight: Approx. 420 g (headband and antennas included) Dimensions: 202×126×110 mm (antennas included), 184×122×110 mm (antennas excluded) Screen Size: 2-inch × 2 Screen Resolution (Single Screen): 1440 × 810 Screen Renew Rate: 144 Hz Communication Frequency: 2.400 – 2.4835 GHz*; 5.725-5.850 GHz *Only supports 5.8Ghz when used with DJI FPV Air Unit Transmitter Power (EIRP): 2.400 – 2.4835 GHz Live View Mode: Low-Latency Mode (810p 120fps); High-Quality Mode (810p 60fps) Video Format: MP4 (Video format: H.264) Supported Video Play Format: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3) Operating Temperature: 32° to 104° F (0° to 40° C) FOV: Adjustable from 30° to 54°. Adjustable image size from 50%-100% Interpupillar Distance Range: 58 -70 mm Supported Storage Card: microSD cards with storage capacities of up to 256GB. DJI FPV Goggles Battery Capacity: 1800 mAh Voltage: 9 V (Max.) Type: LiPo 2S Charging Temperature: 0℃ to 45℃ Energy: 18 Wh Max Charging Power: 10 W Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level) |
Recommend Parts (Not included):
– TPU 3D Printed Camera Mount for Hero 5/6/7/8/9 with ND8 Filter (LINK1) (LINK2)
– TPU 3D Printed Camera Mount for Session (LINK)
Recommend buy following items together ( NOT Included)
Lipo Battery : 6S 1300mAh 120C Lipo Battery XT60 Plug
Radio Transmitter: DJI Remote Controller
Package Included:
1x DJI FPV Goggles V2
1x DJI Battery ( using for Goggles)
1x Cidora SL5 V2.1 4S 6S FPV Drone BNF
1x Caddx VistaNebula Nano Digital System
1x LHCP RP-SMA 5.8g FPV antenna
2 sets x Nazgul 5140 propellers (Set of 4 – Color may vary)
1x 20*250mm battery strap (Color May Vary)
1x 20*200mm battery strap (Color May Vary)
1x TPU bottom stand incl. lock screw