Description :

Broadlink MSLETX RF Universal Remote Control And EU Outlet Smart Socket Set With Night Light Compliant FR Outlet Wireless 433 Mhz Compatible With Broadlink Remote Control For Smart Home Automation Kit

Feature :

– Multiple Control

The socket can be manually operated or via the Remote Control .
– Independent control

The night light can only be controlled by the transmitter . 

– Safe

The socket receiver will still remain in the “OFF” mode after power out, even when the power comes on again. 

– DIY Mode

The transmitter and the socket receiver can be freely combined ( transmitter or socket receiver must from our company ) , only need to program according to the manual .

Specification :

Note：

All remote controlled sockets have been pre-programmed and can be used immediately . To re-program the remote control transmitter and socket receiver , please follow instructions below . 

Re-programming : 

Plug the remote controlled socket to a power and turn the power on .

– Press and hold the power button of the socket receiver for about 3 seconds till the LED indicator on .

– Release the power button .

– Click the left button of the transmitter . Socket programming successful when the LED indicator flashes until it stays on .

– Continue click the right button of the transmitter . Night light programming successful when the LED indicator flashes until it stays on .

（Note : The programming interval of the left and right buttons must be less than 8 seconds , otherwise the night light fail to be programmed .)

–  The remote controlled socket is now ready to use .

Clear programming : 

– Plug the remote controlled socket to a power and turn the power on .

– Press and hold the power button of the socket receiver for about 8 seconds until the LED indicator flashes to go off .

– Release the power button.The clear programming is successful .

Package Includes :

According to type x 1